LEGAL NOTICE.
All contents of this document, firmware updates / software updates and any notes or details referred to and works generated are the property of SMW Electronics Pty Ltd.
All information contained in this document is proprietary and any information generated either as an opinion or review, that is based in part or in full resulted from software updates implementation is not to be released to any 3rd party , online chat or messaging methods , videos and text based messaging , included in any testimonials or any written or referred information without specific written permission and approval from SMW Electronics Pty Ltd. Doing so will be a breach of the conditions outlined within this software update notice and will be subject to legal action being actively taken.
All technical information in this document is subject to change and any software release which includes any design information may have other features and requirements not outlined within this document implemented.
Further SMW Electronics gives no warranties or further extends existing warranties or guaranties by installing of firmware updates to equipment , including and not limited to the performance outcomes on the equipment of any software updates being applied to equipment.
Firmware/ software updates are released “AS IS” with features / fixes and or changes without warranty or commitment to resolve or improve any stated outcome of effect on the equipment
SMW Electronics may allow for firmware updates to be beta released for testing purposes for a period of time determined by SMW Electronics and ANY person or group so nominated to receive such updates are also under the conditions stated by the terms outlined on this document , and have no expectation that a release will be same as tested, nor will such a release be considered final
SMW Electronics reserves the right do updates and release information at time frames at its discretion and to withhold service or software updates when it believes the user and or group has infringed upon the terms stated of this document .
The loss of existing configuration and times stored is expected when a update is applied and is the responsibility of the user or group to set the unit up for use when returned.
THIS WEB PAGE IS RESTRICTED TO OWNERS OF K9 GTS SYSTEM AND NO PART OF THE CONTENT CAN BE REPRODUCED IN ANY FORM , DOING SO IS A BREACH OF THE TERMS AND CONDITIONS OF YOUR AGREEMENT AND WILL HAVE LEGAL ACTION TAKEN TO PROTECT THE PRODUCT AND INTELLECTUAL PROPERTY RIGHTS OF SMW ELECTRONICS.
===========================================================================
Software Ver: 0.83 Date : late Apr /May 2020
K9 Controller: PCB ver 1.60 only
Internal Release: n/a
Beta Release : Test at Ver 0.83
============================================================================
1.0 Release Overview
Add support and event usage for the new K9-GTS Scoreboard Ver FW 0.1, HW 0.0 for display Type 0 ( mono 96 x 16 pixel)
Add ability of system to support up 6 Scoreboards , allow for additional scoreboard configurations
2.0 Scoreboard Features
The scoreboard type 0 are mono displays and are the first LED scoreboards supported by the system , other planed scoreboards sizes and bi-color options are to be looked if the need is required
Ver 0.83 has included the configuration support for the scoreboards and the use in events
Some show jumping events have not had extra features added for the scoreboards as yet and will be done in future release
3.0 Ver 0.82 fixes
Several small fixes were done in this release for ver0.82
1. menu for sensors editing on gates showed incorrect menu
2. several menus when need to change a value where the option would need to scroll up /down to the value , would tend to jump , this has been fixed
3. general code consolidation
—————————————————————————————–